Welcome to Zhejiang Liwei Intelligent Fluid Technology Co., Ltd
High-pressure plunger liposuction pump
The high-pressure plunger grease suction pump for wind turbine bearings is a device used to extract grease from the bearing chamber. It mainly consists of a motor, transmission mechanism, grease pump unit, pressure relief valve, and control system.
This device is capable of extracting very viscous grease, even waste grease mixed with a large amount of metal particles, from the bearing chamber. The grease is then delivered to the corresponding storage container through a high-pressure oil pipe.
Product Advantages
- Efficient operation, capable of extracting viscous grease or waste grease mixed with a large amount of metal particles.
- The outlet pressure can reach 30Mpa, allowing waste grease to be transported over long distances.
- High reliability, using a special design, the grease suction structure is insensitive to metal particles in the grease.
Product
|
Product Model |
LELP15-290 |
|
Suction Depth |
50~500mm |
|
Power Supply Parameters |
24VDC, 220VAC, 72W |
|
System Pressure |
Max 30Mpa |
|
Oil Supply Displacement |
Max 30ml/min |
|
Suction Port Connection |
M14-M50 |
|
Outlet Joint |
M10X1, G1/4, G3/4 |
|
Applicable Grease |
NLG2 and below grease |
|
Working Temperature |
-40℃~85℃ |
keyword:High-pressure plunger liposuction pump
Related Solutions
Related solutions
Related Cases
Related Cases
Zhejiang Liwei Intelligent Fluid Technology Co., Ltd
0571-63865166
610 Qingxian Road, Lin'an District, Hangzhou City, Zhejiang Province
Liwei Technology Public Number
Liwei Technology Tiktok
Website Construction: Liwei Digital Center