Welcome to Zhejiang Liwei Intelligent Fluid Technology Co., Ltd
Fat-removing double-pump barrel lubrication pump
The wind power grease scraping double pump lubrication pump is a device that independently injects grease from two separate grease storage tanks. It mainly consists of a motor, an eccentric drive mechanism, a plunger pump unit, a pressure relief valve, upper and lower grease storage tanks, a grease scraping mixing mechanism, and a control system.
This device can independently keep the lubricant at the bottom of the grease storage tank. Under the action of gravity and the grease scraping mechanism, the grease is pumped to the lubrication point through the plunger pump unit. The lubrication pump must be installed in a vertical position, such as when installed in the engine room.
Product Advantages
- Easily replaces two lubrication pumps, with mechanical installation, electrical installation, and control systems being interchangeable.
- Reduced number of failure points, significantly improved reliability.
- Low space occupancy, alleviating the cramped internal space of the fan.
Product Parameters
|
Product Model |
LP210BB / LP270BB |
|
Capacity Series |
Two pump barrel capacity greater than 35L |
|
Power Supply Parameters |
24VDC, 220VAC, 72W |
|
System Pressure |
Max 35Mpa |
|
Oil Supply Displacement |
0.5ml/min~16ml/min |
|
Number of Outlets |
1, 2, 3, 4 |
|
Outlet Connector |
M10X1, G1/4 |
|
Applicable Grease |
NLG2 and below grease |
|
Working Temperature |
-40℃~85℃ |
keyword:Fat-removing double-pump barrel lubrication pump
Related Solutions
Related solutions
Related Cases
Related Cases
Zhejiang Liwei Intelligent Fluid Technology Co., Ltd
0571-63865166
610 Qingxian Road, Lin'an District, Hangzhou City, Zhejiang Province
Liwei Technology Public Number
Liwei Technology Tiktok
Website Construction: Liwei Digital Center